Metallography Equipment Baincut UM

Baincut UM

Metallography Equipment - Baincut UM

PRODUCT CODE: CMU002

Cutting capacity up to 80 mm dia
Powered by Motor 5 HP, 3 phase motor
Cut-off wheel dia 12" (300 mm)
3 Axis user friendly movement (X,Y,Z)
Spindle speed 2800 rpm
Table size : 260 X 260 mm with 10 mm T-slot
Machine size: 1100mm X 1300mm X 1640 mm (L x D x H)

A sturdy floor model general purpose cutter. Large space in the cutting zone offers flexibility to use wide variety of fixtures. Cutting action possible by lowering the arm ( Z movement) and longitudinal table movement (Y axis) through cutting plane (Y- movement). Additional side movement (X – movement) option is of advantage. Lockable Z movement wheel position offers extra convenience. Suitable for variety of applications including small gears, medium sized auto components and shafts.

Key Features

Optional

Work holding device

Consumables

Technical Data

Key Features

Three axis movement ( X,Y and Z)

X and Y table movement , Z Cutoff wheel Vertical movement

"Z" Movement Stopper

We can limit the Z movement (handle )

Cut off wheel coolant system

Door limit switch

Door will be locked, while cutting operation takes place

Washing jet

To clean the Entire cutting area after cutting operation

Optional

Magnetic Separator

Magnet filter for filtering Coolant Sludge and send clean Coolant Oil to the Recirculation tank

Door safety Interlock

Additional Safety Feature where the Door cannot be opened unless the Cutting process is stopped

Auto wash

To set the required time and leave the machine to clean automatically, So that you can save operator Cleaning time

Twin Cutting

To cut a slice at one stroke

X Movement

This helps to move the specimen and make parallel cut to get a slice

Coolant spilage tray

It helps while cutting extra lengthy samples

Brake Motor system

Additional Safety Feature to stop the Motor and the cutting wheel immediately once the Cutting is stopped

Loto switch & tag out

During Maintenance and Break Downs the Loto Switch can be switched off and locked with the tag key. This prevents from switching on the machine by mistake and avoids damage

Phase monitoring system

In the event of failure of one phase, this unit will stop the Machine and protects the motor from overheating and failure

Work Holding Device

Koppel Fixture ( Imported)

Additional fixture to hold irregular shaped components

Special Fixture

Fixture that can be designed specifically for your components

Swivel Base

Consumables

Cutoff Wheel

Size (mm)

Uses

Application

HRC

RPM

CW003

300 X 31.75 X 2.0

Regular Cutting

Ferrous Material

such as Low carbon

to medium carbon

40 HRC

3800

CW006

300 X 31.75 X 2.0

Hard Steel Cutting

Ferrous Material

such as High carbon

and Hardened Steel

40 – 50 HRC

3800

CB01037A00

Coolant tank filter bag

CFC008

Corrosion-Free Coolant Oil

Coolant for burn free cutting

Ratio: Mixed with demin water only 1:20 (coolant:water)